Introduction

About AIT Drives

SDX-800V series drives are internal AIT drive units that use data cartridges conforming to the AIT-3 Ex format. SDX-800V series drives support AIT-1, AIT-2, AIT-3 and AIT-3 Ex formats.

Features

The SDX-800V series drives have the following features:

Support reading and writing to data cartridges conforming to the AIT-3 and AIT-3 Ex formats.

Supports reading to data cartridges conforming to the AIT-1 and AIT-2 formats.

The second-level error correction code guarantees high data reliability writing to data cartridges conforming to the AIT-3 Ex format.

The third-level error correction code guarantees high data reliability writing to data cartridges conforming to the AIT-1, AIT-2 and AIT-3 formats.

Data compression provides 390 gigabytes of storage on SDX3X-150C.*1The native capacity is 150 gigabytes of storage on SDX3X-150C.

Stored data is automatically checked for compression.

Ultra 160 Wide SCSI LVD/SE interface is fully supported for host computer access.

*1 This is assuming 2.6 : 1 compression ratio.

The degree of data compression attained while recording data varies according to system environment and data type.

7