162
•If “PMB” has al ready been installed on the computer, and the version of the
previously installed “PMB” is higher than that of the “PMB” on the CD-ROM
(supplied), installation is not required. The usable functions are activated when the
camera is connected to the computer using the USB cable.
•If a version of “PM B” under 5.0.00 has been installed on your computer, you may be
unable to use some functions of those “PMB” when installing the “PMB” from the
supplied CD-ROM. Also, “PMB Launcher” is installed from the supplied CD-ROM
and you can start “PMB” or other software by using the “PMB Launcher.” Double-
click the “PMB Launcher” short-cut icon on the computer screen to start “PMB
Launcher.”
Log on as Administrator.
With “Image Data Converter SR” you can do the following, etc.:
• To edit images recorded in RAW format with various corrections, such as
tone curve, and sharpness.
• To adjust images with white balance, exposure, and creative style, etc.
• To save the images displayed and edited on a computer.
• You can either save the image as RAW format or save it in the general
file format.

Installing the software (Macintosh)

1Turn on your Macintosh computer, and insert the CD-ROM
(supplied) into the CD-ROM drive.
2Double-click the CD-ROM icon.
3Copy the [IDS_INST.pkg] file in the [MAC] folder to the hard
disk icon.
4Double-click the [IDS_INST.pkg] file in the copy-to folder.
Follow the instructions on the screen to complete the installation.

Using “Image Data Converter SR”