158
Selecting the drive mode
3 images are recorded with the value of DRO Bracket shifted.
You can shoot using the SHUTTER and 2SEC (the shutter is released after
2 seconds) buttons on the RMT-DSLR1 Wireless Remote Commander
(sold separately). Also, refer to the operating instructions supplied with the
Wireless Remote Commander.
Note
•The RMT-D SLR1 Wireless Remote Commander (sold separately) cannot be used
for movie recording.

DRO Bracket

1 (Drive) button t
(DRO Bracket) t Select
the desired setting
• When Lo is selected, the image is
recorded with DROLv1, Lv2, and Lv3,
and when Hi is selected, the image is
recorded with DROLv1, Lv3, and Lv5.
button
2Adjust the focus and shoot the subject.

Remote Cdr.

1 (Drive) button t
(Remote Cdr.)
button
2Focus on the subject, point the transmitter of the Wireless
Remote Commander to the remote sensor, and shoot the
image.