184
Setting the method for recording on a memory card
card inserted in the camera, set [Upload Settings] to [Off]. is displayed on the
screen when [Upload Settings] is set to [Off].
•When you use a brand-new Eye-Fi card for the first time, copy the install file of Eye-
Fi manager recorded on the card to your computer before formatting the card.
•Use an Eye-Fi card after updating the firmware to the lat est version. For details, refer
to the manual that comes with the Eye-Fi card.
•The power save function of the camera does not work while it is uploading images.
•If (error) is displayed, remove the memory card and reinsert it, or turn off then
turn on the power again. If appears again, the Eye-Fi card may be damaged.
•Wi-Fi network com munication may be influenced by other communication devices.
If the communication status is poor, move closer to the access point of the Wi-Fi
network.
•For details on the fil e types that can be uploaded, refer to the operating instructions
supplied with the Eye-Fi card.
•If you upload an image that was recorded with [GPS On/Off] set to [On], the
location information of the image may be made available to a third party. To prevent
this, set [GPS On/Off] to [Off] (page169) (SLT-A77V only).
•This product do es not support the Eye-Fi “Endless Memory Mode.” Make sure that
Eye-Fi cards that you insert into this product have “Endless Memory Mode” turned
off.