99
Selecting the shooting mode
Shooting (Advanced operations)
Notes
•Since th e camera judges the settings automatically, many features will be
unavailable, such as exposure compensation, ISO setting.
•The flash is set to [Autoflash] or [Flash Off] for each Scene Selection mode. You can
change these settings (pages 47, 135).

Set the mode dial to (Sweep Panorama) or (3D Sweep

Panorama), and shoot images (page45).

Notes
•If you cannot pan or tilt the camera across the entire subject within the given time, a
gray area occurs in the composed image. If this happens, move the camera fast to
record a full panoramic image.
•Since several images are stitched together, the stitched part will n ot be recorded
smoothly. While shooting, do not tilt the camera back and forth, or right and left
when you swing the camera straight ahead.
•Under low li ght conditions, panoramic images may be blurred or not be recorded.
•Under lights t hat flicker such as fluorescent light, the brightness or color of the
combined image is not always the same.
•When the whole angle of panoramic shooting and the angle in which you fixed the
focus and exposure with AE/AF lock are extremely different in brightness, color and
focus, the shooting will not be successful. If this happens, change the lock angle and
shoot again.
•[Sweep Panorama] or [3D Sweep Panorama] is not suitable when shooting:
–Moving subjects.
–Subjects too close to the camera.
–Subjects with a repeating pattern such as tiles, and subjects with little contrast such
as sky, sandy beach, or lawn.
–Subjects with constant change such as waves or water falls.
–Subjects with the sun or electric lights, etc. that are much brighter than
surroundings.
Sweep Panorama/ 3D Sweep Panorama

This mode is suitable for

zShooting expansive scenery, or high-rise buildings with dynamic composition.
zShooting 3D-images with a sense of depths and viewing them using a 3D-

compatible TV.