Step 2 : Setting up the remote commander

Inserting the batteries

Insert two size AA (R6) batteries by matching the + and – on the batteries to the diagram inside the battery compartment.

Insert the negative (–) end first, then push in and down until the positive (+) end clicks into position.

Using the remote

Remote sensor

commander

 

You can use this remote

 

commander to operate this DVD-

 

VCR and a Sony TV. Buttons on

 

the remote commander marked

 

with an orange dot (•) can be used

 

to operate your Sony TV.

TV /

If the TV does not have the

DVD·VIDEO

symbol near the remote sensor, this

SELECT VIDEO

remote commander will not

operate the TV.

SELECT DVD

 

To operate

Set TV / DVD·VIDEO to

 

 

the DVD player

DVD·VIDEO, then press SELECT DVD and point at the remote sensor at

 

the DVD-VCR

 

 

the VCR

DVD·VIDEO, then press SELECT VIDEO and point at the remote sensor

 

at the DVD-VCR

 

 

a Sony TV

TV and point at the remote sensor at the TV

 

 

Notes

•With normal use, the batteries should last about three to six months.

•If you do not use the remote commander for an extended period of time, remove the batteries to avoid possible damage from battery leakage.

•Do not use a new battery with an old one.

•Do not use different types of batteries.

•Do not leave the remote commander in an extremely hot or humid place.

•Do not drop any foreign object into the remote casing, particularly when replacing the batteries.

•Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so may cause a malfunction.

continued

Setting up the remote commander

Started Getting

9