Step 2 : Setting up the remote commander

Inserting the batteries

Insert two size AA (R6) batteries by matching the + and – on the batteries to the diagram inside the battery compartment.

Insert the negative (–) end first, then push in and down until the positive

(+) end clicks into position.

Using the remote

Remote sensor

commander

 

You can use this remote commander

 

to operate this DVD-VCR and a Sony

 

TV. Buttons on the remote

 

commander marked with an orange

 

dot (•) can be used to operate your

 

Sony TV.

TV / DVD·VIDEO

If the TV does not have the

 

symbol near the remote sensor, this

SELECT VIDEO

remote commander will not operate

SELECT DVD

the TV.

To operate

Set TV / DVD·VIDEO to

 

 

the DVD player

DVD·VIDEO, then press SELECT DVD and point at the remote sensor at

 

the DVD-VCR

 

 

the VCR

DVD·VIDEO, then press SELECT VIDEO and point at the remote sensor

 

at the DVD-VCR

 

 

your TV

TV and point at the remote sensor at your TV

 

 

Notes

•With normal use, the batteries should last about three to six months.

•If you do not use the remote commander for an extended period of time, remove the batteries to avoid possible damage from battery leakage.

•Do not use a new battery with an old one.

•Do not use different types of batteries.

•Do not leave the remote commander in an extremely hot or humid place.

•Do not drop any foreign object into the remote casing, particularly when replacing the batteries.

•Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so may cause a malfunction.

Started Getting

Setting up the remote commander 9