4

Press B/b to select an item.

 

5

Press SET UP to exit the menu.

 

Menu choices• Dolby Digital

Selects the type of Dolby Digital signal. The default setting is indicated in bold print.

D-PCM

Select this when the player is connected to an audio component

 

lacking a built-in Dolby Digital decoder.

 

 

Dolby Digital

Select this when the player is connected to an audio component

 

with a built-in Dolby Digital decoder.

 

 

• DTS

Selects whether or not to output DTS signals. The default setting is indicated in bold print.

Off

Select this when the player is connected to an audio component

 

lacking a built-in DTS decoder.

 

 

On

Select this when the player is connected to an audio component

 

with a built-in DTS decoder.

 

 

• Audio DRC (Dynamic Range Control)

Makes the sound clear when the volume is turned down when playing a DVD that conforms to “Audio DRC.” This affects the output from the following jacks:

–LINE OUT AUDIO L/R jacks–DIGITAL AUDIO OUT (COAXIAL) jack only when “Dolby Digital” is set to“D-PCM”.The default setting is indicated in bold print.
Standard

Normally select this positon.

 

 

Wide Range

Gives you the feeling of being at alive performance.

 

 

Notes

•If you connect a component that does not conform to the selected audio signal, a loud noise (or no sound) will come out from the speakers, affecting your ears or causing the speakers to be damaged.

•Noise may occur in the LinearPCM double-speed audio. This is not a malfunction.

Adjustments and Settings DVD

Audio Setup 55US