Sony SLV-D900E Menu choices, Adjustments and Settings DVD

4	Press V/v to select the setup item from the displayed list:
	“Dolby Digital,” “DTS,” “Audio DRC,” or “MPEG.”

ENTER

5	Press B/b to select an item, then press O RETURN to confirm the setting.
	ENTER

RETURN

6	Press O RETURN repeatedly to exit the menu.
	RETURN

Menu choices

• Dolby Digital

Selects the type of Dolby Digital signal. The default setting is indicated in bold print.

D-PCM	Select this when the player is connected to an audio component
	lacking a built-in Dolby Digital decoder.
Dolby Digital	Select this when the player is connected to an audio component
	with a built-in Dolby Digital decoder.

• DTS

Selects whether or not to output DTS signals. The default setting is indicated in bold print.

Off	Select this when the player is connected to an audio component
	lacking a built-in DTS decoder.
On	Select this when the player is connected to an audio component
	with a built-in DTS decoder.

• Audio DRC (Dynamic Range Control)

Makes the sound clear when the volume is turned down when playing a DVD that conforms to “Audio DRC.” This affects the output from the following jacks:

–LINE OUT AUDIO L/R jacks

–DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack only when “Dolby

Digital” is set to “D-PCM.”

The default setting is indicated in bold print.

Adjustments and Settings DVD

Standard	Normally select this position.
TV Mode	Makes the low sounds clear even if you turn the volume down.
	continued
		Audio Setup	57