Adjusting the picture

Adjusting the tracking

Although the VCR automatically adjusts the tracking when playing a tape (the indicator flashes in the display window, then goes off), distortion may occur if the tape was recorded in poor

condition. If so, manually adjust the tracking.

During playback, press the TRACKING +/– buttons on the VCR to display the tracking meter. The distortion should disappear as you press one of the two buttons. (The indicator lights up.) To resume automatic tracking adjustment eject the tape and restart it.

T R A C K I N G

Tracking meter

About Optimum Picture Control

 

 

(OPC)

VIDE O OPTIONS

 

 

Optium Picture Control (OPC) automatically

OP C

[O N ]

SYSTE M

[AUTO]

improves recording and playback quality by

 

 

adjusting the VCR to the condition of the video

 

 

heads and tape. To maintain better picture

SELEC T

: V v

quality, we recommend that you set OPC to ON

SE T

: B b

 

 

in the VIDEO OPTIONS menu (with the OPC

 

 

indicator in the display window lit). For details, see page 32.

 

OPC playback

The OPC function automatically works on all types of tapes, including rental tapes and tapes that were not recorded with OPC.

OPC recording

Whenever you insert a tape and first start recording, the VCR adjusts to the tape using the OPC function (the OPC indicator flashes rapidly). This adjustment is retained until the tape is ejected.

To deactivate the OPC

Press MENU and select SETTINGS, OPTIONS, VIDEO OPTIONS then set OPC to OFF. The OPC indicator in the display window goes off.

Note

•There is a delay of a few seconds before the VCR actually starts recording while the VCR analyses the tape. To avoid the delay, first set the VCR to recording pause (the OPC indicator flashes slowly) and press r REC to have the VCR analyse the tape.

After the OPC indicator stops flashing, press P PAUSE to start recording immediately. If you press P PAUSE before the OPC indicator stops flashing, the OPC function is cancelled.

Additional Operations 31