Sony SLV-E730EX/UX Operation, (when recording on this VCR), Editing with another VCR (continued)

Editing with another VCR (continued)

Operation

(when recording on this VCR)

Before you start editing

•Turn on your TV and set it to the video channel.

•Press INPUT SELECT to display “L2” (or “L1”) in the display window.

•Press SP/LP to select the tape speed, SP or LP.

•On this VCR, set EDIT in the VIDEO OPTIONS menu to ON. If the other VCR has a similar function, turn it on also.

r REC

PPAUSE

1 Insert a source tape with its safety tab removed into the other (playback) VCR. Search for the point to start playback and set it to playback pause.

2 Insert a tape with its safety tab in place into this (recording) VCR. Search for the point to start recording and press PPAUSE.

3 Press rREC on this VCR to set it to recording pause.

4 To start editing, press the PPAUSE buttons on both VCRs at the same time.

To stop editing

Press the pSTOP buttons on both VCRs.

Tips

•To edit more precisely, press the PPAUSE buttons on the VCRs to release pause.

•To cut out unwanted scenes while editing, press P PAUSE on this VCR when an unwanted scene begins. When it ends, press PPAUSE again to resume recording (Assemble Editing).

Note

•If you start editing following the procedure above, the VCR won’t start recording with the OPC function. To record a tape with the OPC function, press r REC again

during recording pause in step 3 so the VCR analyses the tape. Then, when you start editing in step 4, press P PAUSE after the OPC indicator stops flashing. If you press P PAUSE before the OPC indicator stops flashing, the OPC function is cancelled.

54Additional Operations