Step 4

Tuning your TV to the VCR

If you have connected your VCR to the TV using the audio/video cable, skip this step.

?/1 ON/STANDBY

 

 

 

RF CHANNEL PROGRAM +/–

 

 

 

1

ON/STANDBY

Press ?/1 ON/STANDBY to turn on the VCR.

 

 

 

 

 

 

2

 

 

Press RF CHANNEL on the VCR.

The factory-preset RF channel flashes in the display window for

RF CHANNEL about three seconds.

Press RF CHANNEL again while the RF channel is flashing. The VCR signal is output through this channel to the TV.

e.g. SLV-ED25PS/TH and ED15PS

SP

APC

For SLV-ED33ME/MJ/SG: The factory- preset RF channel is “RF 32”

Started Getting

3

 

 

 

 

 

 

Turn on your TV and select a programme position for the VCR picture.

 

 

 

 

 

 

 

This channel will now be referred to as the video channel.

 

 

 

 

 

 

 

Some TV has the programme position, such as 0, that is reserved for

 

 

 

 

 

 

 

a VCR. In this case, select that programme position for the VCR

 

 

 

 

 

 

 

picture. Refer to the instruction manual of your TV for details.

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

 

Press RF CHANNEL.

 

 

 

 

 

 

 

 

The TV system indicator appears in the display window.

 

 

 

 

 

 

 

RF CHANNEL

Press PROGRAM +/– to select the correct TV system.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PROGRAM

If your TV system is

Select

 

 

 

 

+

 

B/G

G

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

I

I

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

D/K

K

 

 

 

 

 

 

 

 

 

continued

Getting Started 7