To record the same programme every day or the same day every week, press m while the date is flashing. For details, see “Daily/ weekly recording” below.
|
| To record from a source connected to the |
|
| INPUT SELECT or PROG +/– to display “L” in the “PROG” |
|
| position. |
3 |
| Press , to confirm the setting. |
| PLAY | The cursor (B) appears at the beginning of the line. To enter another |
| OK | setting, move the cursor to the next line and repeat step 2. |
4 |
| Press OK. |
| PLAY |
|
| OK |
|
5 | • ]/1 | Press ?/1 to turn off the VCR. |
|
| The t indicator appears in the display window and the VCR |
|
| stands by for recording. |
To record from other equipment, leave the connected equipment switched on.
To stop recording
To stop the VCR while recording, press xSTOP.
Daily/weekly recording
In step 2 above, press m to select the recording pattern. Each time you press m, the indication changes as shown below. Press M to change the indication in reverse order.
the current date
MON nEVERY SUN n1 month later n(dates count down) nthe current date
Tips
•To set the programme position, you can also use the PROG +/– or programme number buttons.
•To set the tape speed, you can also use REC SPEED button.
•To record NTSC signals, set the tape speed to SP or EP. To record in the EP mode, set the tape speed to “LP”.
Note
•The t indicator flashes in the display window when you press ?/1 with no tape inserted.
Basic Operations
31 | 10/1/01, 14:25 |
Basic Operations
31
