To set the clock

1 Hold down EASY TIMER so that “DAY” appears in the display window. However, if the clock has already been set, the current setting appears.

2

3

Turn EASY TIMER to set the day.

Press EASY TIMER.

MONTH indicator and “1” appear in the display window.

4 Turn and press EASY TIMER to set the month, and then the year. After you set the year, “CLOCK” appears in the display window.

5

6

Turn and press EASY TIMER to set the hour and minute.

When you have finished setting the time, press EASY TIMER to start the clock.

Tips

To cancel a Easy Timer setting, pressxSTOP on the VCR while you are making the setting.

To record NTSC signals in EP mode, set the tape speed to LP. Even when timer recording is set to LP mode, NTSC signals are automatically recorded in EP mode.

Notes

If eight programmes have already been set using the TIMER PROGRAMMING menu, “FULL” appears in the display window for about five seconds.

The indicator flashes in the display window when you complete the setting in step 11 with no tape inserted.

When the time is set incorrectly, “ERROR” appears in the display window in step

11.Set the timer again from step 1.

continued

23