IN FRONT ANT.
1 
OUT TO TV 2
3 AV1
l: Signal flow
1... Connect the aerial to IN FRONT ANT. of the VCR.
2... Connect OUT TO TV and the aerial input of your TV using the supplied aerial cable.
3... For better picture and sound, connect AV1 (EURO AV) to your TV using a Scart cable if your TV has a Scart
1 ...Turn on your TV and set it to the video channel.
If your TV does not have a Scart (EURO- AV) connector, tune the TV to channel 21 (the initial RF channel of this VCR). Refer to your TV’s manual for TV tuning instructions. If the picture does not appear clearly, see “To change the RF channel.”
2 ...Connect the mains lead to the mains.
The VCR automatically turns on.
3...Press OK.
When all of the receivable channels are preset, the menu disappears from the TV screen. You can rearrange the programme position in any order (see “Changing/ disabling programme positions”).
After the search or download is complete, the current time appears automatically. If the time does not appear, set the clock manually. See “Setting the clock.”
Now you can operate your VCR.Sony Corporation |