To check the remaining time

Press DISPLAY. With the display on, press COUNTER/REMAIN to check the remaining time. Each time you press COUNTER/REMAIN, the

time counter and the remaining time appear alternately. The indicator indicates the remaining time.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SP

 

0 : 0 0 : 2 2

 

 

 

1 : 4 6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Time counter

Remaining time

In order to get an accurate remaining time indication, be sure TAPE LENGTH in the OPTIONS-1 menu is set according to the tape type you use (see page 71).

To watch another TV programme while recording

1 Press t TV/VIDEO to turn off the VIDEO indicator in the display window.

2 Select another programme position on the TV.

To save a recording

To prevent accidental erasure, break off the safety tab as illustrated. To record on the same tape again, cover the tab hole with adhesive tape.

Safety tab

Tips

•To select a programme position, you can use the programme number buttons on the remote commander. For two-digit numbers, press the - (ten’s digit) button followed by the programme number buttons.

•If you connect additional equipment to a LINE connector or jack, you can select the input signal using the INPUT SELECT or PROG +/– buttons.

•The DISPLAY information appears on the TV screen indicating information about the tape, but the information won’t be recorded on the tape.

•If you don’t want to watch TV while recording, you can turn off the TV. When using a decoder, make sure to leave it on.

44Recording TV programmes