Step 3

Connecting the VCR

If your TV has a EURO-AV connector, see page 10.

If your TV does not have a EURO-AV (Scart) connector

 

 

AERIAL IN

 

 

Mains lead

AERIAL OUT

 

 

 

 

 

to mains

AERIAL IN

 

 

 

 

Aerial cable (supplied)

 

 

: Signal flow

 

 

1

Disconnect the aerial cable from your TV

 

 

and connect it to AERIAL IN on the rear

IN

 

panel of the VCR.

 

ENTREE

 

 

 

 

 

AERIAL

OUT

 

 

ANTENNE SORTIE

2

Connect AERIAL OUT of the VCR and

ENTREE

 

 

 

IN

 

the aerial input of your TV using the

 

 

supplied aerial cable.

AERIAL

OUT

 

ANTENNE SORTIE

3

Connect the mains lead to the mains.

 

 

If the mains plug does not fit in the mains, use the supplied plug

 

adaptor.

 

 

Note

•When you connect the VCR and your TV only with an aerial cable, you have to set RF MODULATOR in the OPTIONS-2 menu to ON (initial setting) (see page 63).

continued

Started Getting

Getting Started 9