Step 5 : Tuning your TV to the VCR

If your TV has a Scart (EURO-AV) connector, see page 16.

If your TV does not have a Scart (EURO-AV) connector

Follow the steps below so that your TV will properly receive the video signals from your VCR.

RF CHANNEL

PROGRAM +/–

1 AUTO SET UP

RF CHANNEL

Press RF CHANNEL on the VCR lightly.

The currently set RF channel appears in the display window.

The VCR signal is output through this channel to the TV.

2

3

Turn on your TV and select a programme position for the VCR picture.

This programme position will now be referred to as the video channel.

Tune the TV to the same channel shown in the VCR display window so that the

picture on the right appears clearly on the SONY VIDEO CASSETTE RECORDER TV screen.

Refer to your TV manual for TV tuning instructions.

If the picture does not appear clearly, see “To obtain a clear picture from the VCR.” below.

14Tuning your TV to the VCR