3

Connect LINE-1 (TV) on the VCR and

 

the EURO-AV (Scart) connector on the

 

TV with the optional EURO-AV cable.

 

This connection improves picture and

 

sound quality. Whenever you want to

 

watch the VCR picture, press

 

ÉTV/VIDEO to display the VIDEO

 

indicator in the display window.

4

Connect the mains lead to the mains.

 

If the mains plug does not fit in the mains, use the supplied plug

 

adaptor.

Note

•If the TV is connected to the LINE-1 (TV) connector, setting the RF MODULATOR in the OPTIONS-2 menu to OFF is recommended. In the OFF position, only the signal from the aerial is output through the AERIAL OUT connector (see page 64). You do not have to tune your TV to the VCR. Skip “Tuning your TV to the VCR” on page 15.

About the SMARTLINK features

If the connected TV complies with

SMARTLINK

SMARTLINK, MEGALOGIC*1, EASYLINK*2,

 

Q-Link*3, or EURO VIEW LINK*4, you can use

 

the SMARTLINK function after you complete

 

 

the steps on the previous page (the SMARTLINK indicator appears in the VCR’s display window when you turn on the TV). You can enjoy the following SMARTLINK features.

•Preset Download

You can download your TV tuner preset data to this VCR and tune the VCR according to that data in Auto Set Up. This greatly simplifies the Auto Set Up procedure. Be careful, not to disconnect the cables or exit the Auto Set Up function during the procedure.

See “Setting up the VCR with the Auto Set Up function” on page 14.

continued

Started Getting

Getting Started 11