Searching using the index function
(not available on
The VCR automatically marks the tape with an index signal at the point where each recording begins. Use these signals as references to find a specific recording.
To find a specific recording by scanning (Index scan)
1 Insert an indexed tape into the VCR.
2 Press ./> (index search). The VCR starts scanning each recording for
five seconds in the correspondingINDEX SCAN : B B direction.
3 Press H (play) to start playback when you find the desired point.
To search a specific recording (Index search)
1 Insert an indexed tape into the VCR. |
|
2 Press ./> (index search) twice. |
|
• To search ahead, press > (index |
|
search) twice. | INDEX SEARCH : B B + 0 2 |
•To search backwards, press . (index search) twice.
3 Press ./> (index search) depending on the direction where your desired programme is located.
Each time you press the button, the number increases or decreases up to ±20, respectively.
4 The VCR starts searching, and playback starts automatically from that point.
To stop searching
Press x (stop).
Operations Additional
continued
Searching using the index function (not available on