
Additional Information
Troubleshooting
If you have any questions or problems not covered below, please consult your nearest Sony service facility.
| Symptom | Remedy | |
|
|
|
|
| The ?/1 (on/standby) | • | Connect the mains lead to the mains securely. |
| switch does not function. |
|
|
|
|
|
|
Power | The power is turned on | • | Moisture condensation has occurred. Turn the power off, |
but the VCR does not |
| unplug the mains lead and leave the VCR to dry for over | |
|
| ||
| operate. |
| three hours. |
|
|
| |
| The VCR is plugged in | • Set VEILLE ECO in the RÉGLAGES UTILISATEUR | |
| but the display window |
| menu to NON (see page 68). |
| remains dark. |
|
|
|
|
| |
Clock | The clock has stopped | • The clock stops if the VCR is disconnected from the mains. | |
the display window. |
| Reset the clock (and timer). | |
| and “– |
|
| The playback picture | • | Make sure the TV is set to the video channel. If you are | Additional |
|
| |||
| does not appear on the |
| using a monitor, set it to video input. |
|
| TV screen. | • | If the VCR is connected to the TV with the PERITEL |
|
|
|
| cable, make sure the MAGN or VIDEO indicator is lit in |
|
|
|
| the display window. Use the t TV/MAGN button on the | Information |
|
|
| remote commander to light up the MAGN or VIDEO | |
|
|
|
| |
|
|
| indicator. |
|
|
|
|
|
|
| The picture is not clear. | • | Adjust the tracking with the CHAINE +/– buttons on the |
|
|
|
| VCR. |
|
Playback | • The video heads are dirty (see the last page of |
| ||
| Troubleshooting). Clean the video heads using a Sony |
| ||
|
|
|
| |
|
|
| video head cleaning cassette. If a Sony cleaning cassette is |
|
|
|
| not available in your area, have the heads cleaned at your |
|
|
|
| nearest Sony service facility (a standard service charge will |
|
|
|
| be required). Do not use a commercially available liquid |
|
|
|
| type cleaning cassette other than Sony’s, as it may damage |
|
|
|
| the video heads. |
|
|
| • | The video heads may have to be replaced. Consult your |
|
|
|
| local Sony service facility for more information. |
|
|
|
|
|
|
| The picture has no | • | The SYST. COULEUR option in the RÉGLAGES |
|
| colour. |
| UTILISATEUR menu is set to the wrong position. Set the |
|
|
|
| option to conform to the system that the tape was recorded |
|
|
|
| in. |
|
continued
Troubleshooting 75