Adjusting the picture

Although the VCR automatically adjusts the picture when playing a tape, distortions or noise may occur if the tape was recorded in poor condition. If so, manually adjust the resolution, colour and tracking.

RESOLUTION CONTROL II

buttons

AUTO/MANU

V/v NORMAL/ SLOW/STILL ADJUST

M/m/</, Resolution Control II

STANDARD

PICTURE

STD PICT

Adjusting the resolution and colour

1 While playing a tape, press M/m/</, RESOLUTION CONTROL II (up/down/left/ right button on the VCR) to display the RESOLUTION CONTROL II menu.

The RESOLUTION CONTROL II buttons light up.

RESOLUTION CONTROL II

•

•

•

•

• C

•

•

•

•

• O

•

+

•

• L

•

•

•

•

• O

•

•

•

•

• R

RESOLUTION

2 Press </,RESOLUTION CONTROL II (left/right button on the VCR) to get a clearer picture.

3 Press M/mRESOLUTION CONTROL II (up/down button on the VCR) to get the best picture colour.

Wait for several seconds until the RESOLUTION CONTROL II menu disappears.

To resume the automatic adjustment

Press STANDARD PICTURE on the remote commander (STD PICT on the VCR) so that the RESOLUTION CONTROL II buttons turn off.

Adjusting the tracking

Press V/v TRACKING NORMAL/SLOW/STILL ADJUST to obtain the best possible picture. The distortion should disappear as you press one of the two buttons. If you cannot get a clear picture with manual adjustment, press TRACKING AUTO/MANU to return to automatic adjustment.

continued

Additional Operations 17