Tip

•To set tracking to the centre position, press the TRACKING + and – buttons at the same time.

Notes

•You can adjust the tracking for the NTSC-recorded tape but the tracking meter won’t be displayed.

•There is a delay about ten seconds before the VCR actually starts recording while the VCR analyses the tape. To avoid the delay, first set the VCR to recording pause (the OPC indicator flashes slowly) and press rREC to have the VCR analyse the tape (the OPC indicator flashes rapidly). After the OPC indicator stops flashing, press PPAUSE to start recording immediately. If you want to start recording quickly without using the OPC function, first set the VCR to recording pause (the OPC indicator flashes slowly) and press PPAUSE to start recording.

Additional Operations 43