Note

•If the other VCR does not have a Scart (EURO-AV) connector, use the VMC- 2106HG cable instead and connect the cable to the line out jacks of the other VCR.

Operation (when recording on this VCR)

Before you start editing

z REC

 

•Turn on your TV and set it to the video channel.

•Press INPUT SELECT to display the

connected line in the display window.

X

1 Insert a source tape with its safety tab removed into the other (playback) VCR. Search for the point to start playback and set it to playback pause.

2 Insert a tape with its safety tab in place into this (recording) VCR. Search for the point to start recording and press X (pause).

3 Press z REC on this VCR to set it to recording pause.

4 To start editing, press the X (pause) buttons on both VCRs at the same time.

To stop editing

Press the x (stop) buttons on both VCRs.

Tip

•To cut out unwanted scenes while editing, press X (pause) on this VCR when an unwanted scene begins. When it ends, press X (pause) again to resume recording.

Operations Additional

Editing with another VCR 51