| Symptom | Remedy | |
|
|
| |
| The ENR SYNCHRO | • The tape has reached its end. Insert a new tape and press ENR | |
| button turns off while | SYNCHRO again. | |
Recording | recording or does not go |
| |
back to recording standby |
| ||
mode. |
| ||
|
| ||
The Synchronized | • The connected equipment was not turned off. | ||
Recording function does not | Turn off the connected equipment and press ENR SYNCHRO | ||
Synchronized | |||
work. | again. | ||
| • There was a power failure. Press ENR SYNCHRO again. | ||
|
| ||
The programme recorded | • If the settings for timer recordings and Synchronized Recording | ||
with the Synchronized | overlap, the programme that starts first has priority and the second | ||
Recording function is | programme starts recording only after the first programme has | ||
| |||
| incomplete. | finished. | |
|
| • There was a power failure. Press ENR SYNCHRO again. | |
|
|
| |
| You cannot set the channel | • Check that DECODEUR/LIGNE3 (or DECODEUR/LIGNE2) in | |
| as the Canal Plus in the | the | |
| REGLAGE DES CHAINES |
| |
| menu. |
| |
Plus |
|
| |
You cannot watch the Canal | • Check that DECODEUR/LIGNE3 (or DECODEUR/LIGNE2) in | ||
Plus programme when the | the | ||
Canal | VCR is in standby mode. | • Make sure the Canal Plus Scart cable is plugged securely. | |
|
| ||
The Canal Plus programme | • Make sure the Canal Plus Scart cable is plugged securely. | ||
| is always recorded | • Check that DECODEUR/LIGNE3 (or DECODEUR/LIGNE2) in | |
| scrambled. | the | |
|
| • Check that this channel is set as Canal Plus in the REGLAGE DES | |
|
| CHAINES menu (see page 37). | |
|
|
|
88Troubleshooting