4

AUTO

Press RF CHANNEL.

SET UP

 

You have now tuned your TV to the VCR. Whenever you want to play a tape, set the TV to the video channel.

RF CHANNEL

To check to see if the TV tuning is correct

Set the TV to the video channel and press PROGRAM +/– on the VCR. If the TV screen changes to a different programme each time you press PROGRAM +/–, the TV tuning is correct.

To obtain a clear picture from the VCR

If the screen does not appear clearly in step 3 above, press PROGRAM +/– so that another RF channel appears. Then tune the TV to the new RF channel so that a clear picture appears.

If your TV has a Scart (EURO-AV) connector

RF CHANNEL

PROGRAM +/–

1 AUTO SET UP

RF CHANNEL

Press RF CHANNEL on the VCR lightly.

The currently set RF channel appears in the display window.

The VCR signal is output through this channel to the TV.

2

PROGRAM

Press PROGRAM +/– to set the RF channel to OFF, and press RF

 

CHANNEL again.

AUTO

SET UP

RF channel set up is complete.

RF CHANNEL

22Tuning your TV to the VCR