26
• If the HDMI OUT ja ck is connected to equipment
with a DVI jack, “RGB” signals will be
automatically output even if you select “YCBCR.”
◆AUDIO (HDMI)
Selects the type of audio signal output from
the HDMI OUT jack.
b
A loud noise (or no sound) will be output if you
connect the player to a TV that is not compatible
with DOLBY DIGITAL/MPEG signals and
“AUTO” is selected. In this case, select “PCM.”
◆CONTROL FOR HDMI
Switches the Control For HDMI setting on or
off.
◆LANGUAGE FOLLOW
Switches the languages of this player to that
of the current TV OSD language.
You cannot select this when “CONTROL
FOR HDMI” is set to “OFF.”
b
• Turn off any display before using t his function.
• The OSD language for the player is maintained if
the TV’s language cannot be supported.
AUTO Normally, select this. Outputs
audio signals according to the
“DIGITAL OUT” settings
(page24) .
PCM Converts Dolby Digital,
MPEG, or 96 kHz/24 bit PCM
signals to 48 kHz/16 bit PCM.
ON Allows you to use the
CONTROL FOR HDMI
features (page9 ).
OFF Switches this function off.
ON Switches this function on.
OFF Switches this function off.