Administrating the Camera
Setting the Schedule — Schedule Menu / Setting the Alarm Buffer — Alarm buffer Menu
90
Setting the Schedule

— Schedule Menu

When you click in the Administrator menu,
the Schedule menu appears.
The Schedule menu consists of 8 tabs.
This is the same menu as the Schedule menu that is
displayed when you click Schedule to set the Effective
period in the following menus.
Day/Night: Schedule in the Day/Night tab of the
Camera menu
Preset position: Schedule in the Position Tour of the
Preset position menu
e-Mail: Schedule in the Alarm sending or Periodical
sending tab of the e-Mail (SMTP) menu
FTP: Schedule in the Alarm sending or Periodical
sending tab of the FTP client menu
Image memory: Schedule in the Alarm recording or
Periodical recording tab of the Image memory menu
Alarm out: Schedule in the Alarm out 1 or Alarm out 2
tab of the Alarm output menu
Voice alert: Schedule in the Voice alert 1, 2 or 3 tab of
the Voice alert menu
Edge Storage: Schedule button in the Edge Storage
menu
Example: When setting e-Mail (SMTP) (Periodical
sending) in the Schedule menu
Use the same time schedule every day
When this item is checked, the same Start time and End
time are applied to all days. In that case, the Start time
and End time of the day from Mon (Monday) to Sun
(Sunday) cannot be input.
Mon (Monday) to Sun (Sunday)
The time period on the right of the checked day is the
effective period of the schedule.
Start time, End time
Specify the start time and the end time.
OK/Cancel
See “Buttons common to every menu” on page 32.
Setting the Alarm Buffer

— Alarm buffer Menu

When you click in the Administrator menu,
the Alarm buffer menu appears.
You can set the Pre-alarm image and audio (the image
and audio before alarm detection) and the Post -alarm
image and audio. These can be set when Alarm sending
of FTP client menu or Alarm recording of the Image
memory menu is set to On, besides when Use alarm
buffer is selected.

Codec

Select the image to be used for the alarm buffer.

Recording capacity

Displays the maximum recording capacity of the alarm
buffer in the present camera setting of the video mode,
image size, bit rate and frame rate.

Recording time

Set the recording time for the Pre-alarm image/audio
and Post alarm image/audio.
Pre-alarm duration: Type the recording time of the
image/audio before alarm detection.
Post-alarm duration: Type the recording time of the
image/audio after alarm detection.
Note
The value of Recording capacity differs depending on
the image size and image quality settings in the Camera
menu.
OK/Cancel
See “Buttons common to every menu” on page 32.
Schedule Alarm buffer