Administrating the Camera
Sending Images to FTP Server — FTP Client Menu
68
Sending Images to FTP
Server — FTP Client Menu
When you click in the Administrator menu,
the FTP client menu appears.
Use this menu to set up for capturing and sending still
images to an FTP server. Using the FTP client function,
you can send an image file that has been shot and
recorded linked with external sensor input or the built-in
detection functions to an FTP server. An image file can
also be sent periodically.
The FTP client menu consists of three tabs: Common,
Alarm sending and Periodical sending.

Common Tab — Setting the FTP

client function

FTP client function

To activate the FTP client function, select On.
Note
The frame rate and operability on the main viewer may
be reduced while a file is being transmitted by the FTP
client function.

FTP server name

Type either the FTP server name to upload still images
using up to 64 characters, or the IP address of the FTP
server.

User name

Type the user name for the FTP server using up to 64
characters.

Password

Type the password for the FTP server using up to 64
characters.

Re-type password

To confirm the password, type the same characters as
you typed in the Password box.

Passive mode

Set whether you use the passive mode of FTP server or
not when connecting to the FTP server. Select On to
connect to the FTP server using the passive mode.
OK/Cancel
See “Buttons common to every menu” on page 32.

Alarm sending Tab — Setting the

FTP client action when detecting

the alarm

Set to forward an image file to a specified FTP server
linked with alarm detection by the external sensor input
or by the built-in detection functions.
Note
When more than two of the following settings are
activated, the camera only creates two still images at the
same time. A third still image cannot be created unless
one of the previous two still images is sent.
e-Mail (SMTP) menu
– Alarm sending tab Alarm sending (when file
attachment is set to On).
– Periodical sending Periodical sending
FTP client menu
– Alarm sending tab Alarm sending
– Periodical sending Periodical sending
Trigg er m enu
–Mail (SMTP)
–FTP Client

Alarm sending

Select On to send the image file to the FTP server linked
with alarm detection.
FTP client