Setting the Schedule

— Schedule setting Page

When you click Schedule on the Administrator menu, the Schedule setting page appears.

Use this page to set up to six schedules used for the preset position function, Day/Night function, FTP client function, SMTP function, Alarm out 1 or 2 function and Image memory function.

Setting the Activity Detection Function —

Activity detection setting Page

When you click Activity detection on the Administrator menu, the Activity detection setting page appears.

Use this page to set up for the activity detection to link various applications.

Camera the Administrating

Schedule No. 1 to Schedule No. 6

For each schedule, specify Start time (hour and minutes) and End time (hour and minutes), and check the days of the week that you want to activate the function.

OK/Cancel

See “Buttons common to every setting page” on page 16.

Sensitivity

Select the sensitivity of the activity detection from the drop-down list. You can select the sensitivity between Level 1 and Level 9. Level 9 is the maximum sensitivity.

Tip

The Sensitivity of the activity detection means a proportion of the changed area (pixels) to the whole activity detection area.

OK/Cancel

See “Buttons common to every setting page” on page 16.

Setting the Activity Detection Area

Set the activity detection working area as follows:

1 Determine the view angle of the camera at which you want to perform activity detection, using the pan, tilt and zoom.

2 Click Activity detection on the Administrator menu.

A still picture is captured and the Activity detection setting page appears.

40 Setting the Schedule — Schedule setting Page / Setting the Activity Detection Function — Activity detection setting Page