When your camcorder is on, you can check the approximate amount of remaining battery power with the remaining battery indicator at the upper left on the LCD screen.

To remove the battery pack

Close the LCD screen. Slide the BATT (battery) release lever and remove the battery pack

.

To use a wall outlet (wall socket) as a power sourceMake the same connections as “Step 1: Charging the battery pack.”Notes on the battery pack and the AC Adaptor

When you remove the battery pack or disconnect the AC Adaptor, close the LCD screen and make sure

that the

 

(Movie) lamp/ (Photo) lamp (p. 12)/ACCESS/access lamp (p. 10, 36) are turned off.

 

 

 

 

 

Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This may cause a malfunction.

In the default setting, the power turns off automatically if you leave your camcorder without any operation for about 5 minutes, to save battery power ([A.SHUT OFF]).

Charging the battery pack abroad

You can charge the battery pack in any countries/regions using the AC Adaptor supplied with your camcorder within the AC 100 V - 240 V, 50 Hz/60 Hz range.

Do not use an electronic voltage transformer.

started Getting

11