A

Head band
Support band
Light reflector
FM flexible
antenna
Battery
compartment

 

 

Driver
TUNE
units
POWER

 

Dial scale
VOL

 

 

BAND
SENS

B

AAA (R03) x 1

 

Insert the # side of the battery first.

Getting Started

Installing the Battery

(See Fig. B)
1While pressing the battery compartment lid, slide it to open.
2Insert one size AAA (R03) battery (not supplied) with correct polarity.
3To close the lid, press and slide the lid down until it clicks.
When to replace the battery

Replace the battery when the sound becomes weak or distorted. Remove the old battery and insert a new one.

Battery life (approximate hours)

 

Sony

Sony

 

alkaline

size AAA

 

size AAA

(R03)

 

(LR03)

 

FM reception

80

40

AM reception

100

50

Notes on the battery

Align the battery correctly.

The dry battery cannot be charged.

To avoid damage from possible battery leakage, remove the battery when unit will not be used for a long time.

Wearing the Radio

1Pull out the support band fully from the headband.
2Adjust the headband and the support band to fit your head.
Note on the support band (See Fig. A)

When the radio not in use, put the support band back by pushing down both ends as illustrated and push it back underneath the headband.

Note on the light reflector (See Fig. A)

This reflector reflects a car light at night for your safety.

Playing the Radio

1Set POWER to ON.
2Set BAND to select FM or AM.

For FM, set SENS to LOCAL if interference is prevalent and reception is too strong. Under normal condition, set it to DX.

3Turn TUNE (tuning) to tune in a station.
4Adjust the volume using VOL.

To turn off the radio

Set POWER to OFF.