TUNE – TUNE +*
Neckband

Driver unit

 

Driver unit

MODE/ENTER
VOL –
MEGA BASS/
VOL +*
CLOCK

 

 

 

POWER

*The TUNE + and VOL + have a tactile dot.

B

C

D

Setting the Clock

The display will flash “AM 12:00” when a battery is first inserted.

1Set POWER to OFF to turn off the power.
2Hold down MEGA BASS/CLOCK for more than 2 seconds.

A beep sounds and the hour flashes in the display.

AM

3Press TUNE + or – until the correct hour appears in the display.

Each press changes the digit(s) by one.

When you keep the button pressed, the digit(s) change rapidly.

4Press MEGA BASS/CLOCK.

A beep sounds and the minutes start to flash.

Repeat step 3 to set the minutes. After setting, press MEGA BASS/CLOCK again. Two beeps sound, “:” starts flashing, and the clock starts from 0 seconds.

If you press MODE/ENTER while setting, the clock, the clock setting will be canceled.

AM

Note

While setting the clock, you must perform each step within 65 seconds, or the clock setting mode will be canceled.

Wearing the Headphone Radio

1Wear the neckband around the back of your head. (See Fig. B.)

2Wear the headphones with the Driver unit marked L in your left ear, and the Driver unit marked R in your right. (See Fig. C-1)

3Adjust the angle of the neckband to fit the headphones on your ears. (See Fig. C-2)

How to install the earbuds correctly (See Fig. D)

If the earbuds do not fit your ears correctly, low-bass sound may not be heard. To enjoy better sound quality, adjust the earbuds position to sit on your ears comfortably or push them into the inside of your ears so that they fit your ears snugly. If the earbuds do not fit your ears, try ones of other size.

Playing the Radio

— Manual Tuning

1Set POWER to ON (DX) to turn on the power.2If “P” is displayed, press MODE/ENTER so that “P” disappears.

Pressing MODE/ENTER will switch over between manual tuning mode and preset tuning mode.

3Press TUNE + or – to select the desired frequency.

If you hold down TUNE + or –, the frequency changes rapidly.

When the frequency matches the broadcast frequency, the broadcast will be received.

4Adjust the volume using VOL + or –.To turn off the radio, set POWER to OFF.

Improving the Reception

Set POWER to LOCAL if interference is prevalent and reception is too strong. Under normal conditions, set it to DX.

Note

If POWER is set to LOCAL under normal conditions, reception sensitivity will decrease.

Obtain Powerful Bass Sound

Press MEGA BASS/CLOCK.

Presetting Your Favorite Station

— Preset Tuning

You can preset up to 15 FM stations. You can also delete a preset station, whether it is factory-set or preset by yourself.

Presetting a Station

1Follow steps 1 to 3 in “Playing the Radio” and manually tune in to the station you wish to preset.

2Hold down MODE/ENTER until the preset number flashes.

A preset number without a preset station will flash.

When all the preset numbers are set to stations, the following occurs:

•Initialized (factory-set): “1” flashes and “P” appears.

•After tuning in a preset station: The next preset number after the one last preset flashes and “P” appears.

P

3Press TUNE + or – to select the number you wish to preset, then press MODE/ENTER.

When you select the preset number using TUNE + or –, “P” appears if that number has a preset station. If it has no preset station, only the number flashes and “P” does not appear.

When you press MODE/ENTER, the selected preset number lights up in the display.

Example: Display window when you assign FM 87.5 MHz to preset number 2.

P

To preset another station, repeat the above steps.

To change a preset station, assign a new station. The previous station will be canceled.

To cancel the presetting mode, set POWER to OFF.

Note

If you do not press TUNE + or –, or MODE/ENTER within 65 seconds, the preset tuning mode will be canceled.

Tuning in to a Preset Station

1Set POWER to ON (DX) to turn on the power.

2Press MODE/ENTER so that “P” and preset number appear.3Press TUNE + or – to select the desired preset number.

4Adjust the volume using VOL + or –.

To turn off the radio, set POWER to OFF.

Deleting a Preset Station

1Follow steps 1 and 2 in “Tuning in to a Preset Station”.2Press TUNE + or – to select the preset number to be deleted.

3Hold down MODE/ENTER for more than 4 seconds until “P”, “” and the preset number flash.

preset number to
P be deleted
4While the letters and the preset number are flashing, press MODE/
ENTER.

The station set to the preset number just before the deleted station will be displayed.

To delete other stations, repeat steps 2 to 4.

If all the preset stations are deleted, “P -” appears in the display.

To cancel the deleting mode, set POWER to OFF while “P”, “” and the preset number are flashing.

“MB” indication appears in the display when the MEGA BASS function is on. The MEGA BASS function intensifies the bass sound for richer quality audio reproduction.