Turning off the receiver with the TV

(System Power Off)

When you turn the TV off by using the power button on the TV’s remote, the receiver and the connected components turn off automatically.

You can also use the receiver’s remote to turn off the TV.

TV

AV ?/1

Press TV, then press AV ?/1.

The TV, receiver and connected components are turned off.

Notes

Set the TV power supply interlock function to on before using the System Power Off function. For details, see the operating instructions of the TV.

Depending on the status, the connected components may not be turned off. For details, see the operating instructions of the connected components.

The location, label of the remote will vary according to models and areas.

Troubleshooting

If you experience any of the following difficulties while using the HDMI CONTROL function, use this troubleshooting guide to help you remedy the problem.

The HDMI CONTROL function does not work.

Check the HDMI connection (page 3).

Make sure “HDMI Control” is set to “ON” in HDMI settings menu.

Make sure the connected component is compatible with the HDMI CONTROL function.

Check the HDMI CONTROL settings on the connected component. See the operating instructions of the connected component.

If you change the HDMI connection, connect/disconnect the AC power cord, or there is a power failure, repeat the procedures of “Preparing for HDMI CONTROL function” (page 4).

No sound is output from the receiver and TV speaker while using the System Audio Control function.

Make sure the TV is compatible with the System Audio Control function.

If the TV does not have System Audio Control function, set the “HDMI Audio” settings in HDMI settings menu to

“TV+AMP” if you want to listen to the sound from the TV speaker and receiver.

“AMP” if you want to listen to the sound from the receiver.

You cannot listen to the sound of a component connected to the receiver while a TV is selected as the input on the receiver.

Change the input of the receiver to HDMI when you want to watch a program on a component connected to the receiver.

continued

7GB