4:Connecting the AC power cord

Connect the supplied AC power cord to the AC IN terminal on the receiver, then connect the AC power cord to a wall outlet.

AC power cord

AC OUTLET

*

 

S2 VIDEO

S2 VIDEO

S2 VIDEO

IN

OUT

IN

VIDEO

VIDEO

VIDEO

AUDIO

AUDIO

AUDIO

AC OUTLET

EO 2

VIDEO 1

AL

SUB

WOOFER

BL

RONT SPEAKERS

AUDIO OUT

AC IN

terminal

*The configuration, shape, and number of AC outlets vary according to the area code.

Notes

•The AC OUTLET(s) on the rear of the receiver is a switched outlet, which supplies power to the connected component only while the receiver is turned on.

•Make sure that the total power consumption of the component(s) connected to the receiver’s AC OUTLET(s) does not exceed the wattage stated on the rear panel. Do not connect high-wattage electrical home appliances such as electric irons,

fans, or TVs to this outlet. This may cause a malfunction.

Before using the receiverPerforming initial setup operations

Before using the receiver for the first time, initialize the receiver by performing the following procedure.

This procedure can also be used to return settings you have made to their factory defaults.

1Press ?/1 on the receiver to turn off the receiver.

2Hold down ?/1 on the receiver for 5 seconds.

3While “ENTER to Clear All” appears in the display, press MEMORY/ENTER on the receiver.

After “MEMORY CLEARING...” appears in the display for a while, “MEMORY CLEARED!” appears.

The following are reset to their factory settings.

•All settings in the SPEAKER SET UP,

LEVEL, SURR SET UP, EQUALIZER, CUSTOMIZE, TUNER and CIS (models of area code U, CA only) menus.

•The sound field memorized for each input and preset station.

•All preset stations.

•All index names for inputs and preset stations.

Note

If “2nd zone on” or “3rd zone on” appears in the display, the initial setup operation cannot be performed. Turn off the indication by following the first tip of “Listening to the sound in another zone” (page 52).

Before using the remote for the first time (STR-DA5000ES only)

When you use the remote for the first time, be sure to perform the following procedure. The remote is optimized for the receiver.

1Press RM SET UP.

18GB