Changing the factory
setting of a function button
If the factory settings of the FUNCTION buttons do not match your system components, you can change them. For example, if you have a tape deck and you do not have an MD deck, you can assign the MD/TAPE button to your tape deck.
Note that the settings of the TUNER button cannot be changed.
1 Hold down the Function button whose function you want to change (for example, MD/TAPE).
2 Press the corresponding button of the component you want to assign to the Function button (for example, 4 – Tape deck).
The following buttons are assigned to select the functions:
To operate | Press |
CD player | 1 |
|
|
DAT deck | 2 |
|
|
MD deck | 3 |
|
|
Tape deck A | 4 |
|
|
Tape deck B | 5 |
|
|
LD player | 6 |
|
|
VCR (command mode VTR 1*) | 7 |
|
|
VCR (command mode VTR 2*) | 8 |
|
|
VCR (command mode VTR 3*) | 9 |
|
|
TV | 0 |
|
|
DSS (Digital Satellite Receiver) | >10 |
|
|
DVD | ENTER |
|
|
VCD player | . |
|
|
*Sony VCRs are operated with a VTR 1, 2 or 3 setting. These correspond to Beta, 8mm and VHS respectively.
Now you can use the MD/TAPE button to control the tape deck.
To reset a button to its factory setting
Repeat the above procedure.
To reset all the function buttons to their factory setting
Press ?/1, AV ?/1 and MASTER VOL – at the same time.