Press input buttons to select the input.

Advanced Adjustments and Settings

Assigning the component video input

COMPONENT VIDEO INPUT ASSIGN
(Except for models of area code CEL, CEK)

You can assign a component video input for another visual input.

1 Press MAIN MENU repeatedly to select “CUSTOM”.
2 Press or repeatedly to select “COMP. V. A.”.

3 Press ENTER.

4 Press or repeatedly to select the component video input you want to assign.

5 Press + or – repeatedly to select the input you want to assign the component video input jacks selected in step 4.

The input you can assign varies for each component video input. For details, see “Selectable component video inputs for each input”.

6 Press ENTER.
Selectable component video inputs for each input

The initial settings are underlined.

VIDEO 2

VIDEO 1, VIDEO 2, VIDEO 3

DVD

VIDEO 1, VIDEO 3, DVD

Note

You cannot assign a visual input to more than one component video input.

Switching the audio input mode for digital components

— INPUT MODE

You can switch the audio input mode for components which have digital audio input jacks.

1

2 Press INPUT MODE repeatedly to select the audio input mode.

The selected audio input mode appears in the display.

Audio input modes

AUTO IN

Gives priority to digital signals when there are both digital and analog connections. If there are no digital signals, analog is selected.

COAX IN

Specifies the digital audio signals input to the DIGITAL COAXIAL input jack.

OPT IN

Specifies the digital audio signals input to the DIGITAL OPTICAL input jacks.

ANALOG

Specifies the analog audio signals input to the AUDIO IN (L/R) jacks.

Notes

When signals with a sampling frequency of more than 48 kHz is input, the tone and sound field cannot be used.

Some audio input modes may be dimmed depending on the input. This means that the selected input is unavailable.

36GB