Inputs (Digital)
DVD (Coaxial) | Sensitivity: – |
| Impedance: 75 ohms |
| S/N: 100 dB |
| (A, 20 kHz LPF) |
|
|
VIDEO 2, | Sensitivity: – |
(Optical) | Impedance: – |
| S/N: 100 dB |
| (A, 20 kHz LPF) |
|
|
Outputs (Analog) |
|
|
|
MD/TAPE (OUT), | Voltage: 500 mV |
VIDEO 1 (AUDIO OUT) | Impedance: 10 k ohms |
|
|
SUB WOOFER | Voltage: 2 V |
| Impedance: 1 k ohm |
|
|
Tone |
|
|
|
Gain levels | ±6 dB, 1 dB step |
|
|
| FM tuner section |
|
Tuning range | 87.5 - 108.0 MHz |
Antenna | FM wire antenna |
Antenna terminals | 75 ohms, unbalanced |
Intermediate frequency | 10.7 MHz |
Sensitivity |
|
Mono: | 18.3 dBf, 2.2 µV/75 ohms |
Stereo: | 38.3 dBf, 22.5 µV/75 ohms |
Useable sensitivity | 11.2 dBf, 1 µV/75 ohms |
S/N |
|
Mono: | 76 dB |
Stereo: | 70 dB |
Harmonic distortion at 1 kHz | |
Mono: | 0.3% |
Stereo: | 0.5% |
Separation | 45 dB at 1 kHz |
Frequency response | 30 Hz – 15 kHz, |
| |
Selectivity | 60 dB at 400 kHz |
Tuning range |
|
|
Models of area code U, CA | – 1,710 kHz6) | |
With | 530 | |
With | 531 | – 1,710 kHz6) |
Models of area code E2/E3 |
| – 1,610 kHz6) |
With | 530 | |
With | 531 | – 1,602 kHz6) |
Models of area code CEL, CEK, AU, TW, KR | ||
With | 531 | – 1,602 kHz |
Models of area code AR |
|
|
With | 530 | – 1,610 kHz |
Antenna | Loop antenna | |
Intermediate frequency | 450 kHz | |
Usable sensitivity | 50 dB/m (at 1,000 kHz or | |
| 999 kHz) | |
S/N | 54 dB (at 50 mV/m) | |
Harmonic distortion | 0.5% (50 mV/m, 400 Hz) | |
Selectivity |
|
|
At 9 kHz: | 35 dB | |
At 10 kHz: | 40 dB | |
6)You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. While holding down PRESET TUNING + or TUNING +, press ?/1. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure.
Video sectionInputs/Outputs
Video:1
COMPONENT VIDEO:
(Except for models of area code CEL, CEK) Y: 1
80 MHz HD Pass Through
Information Additional
continued