Manuals / Brands / Home Audio / Stereo Receiver / Sony / Home Audio / Stereo Receiver

Sony STR-DG710 Error and warning codes, 29GB, Press, Press, tENTER, 2Press, 2Press, display t ENTER, surround speakers, 4Rectify the error, To rectify the error

1 80

Download 80 pages, 1.34 Mb

Error and warning codesWhen error codes appear

When an error is detected during Auto Calibration, an error code will appear on the display cyclically after each measurement process as follows:

Error code t blank display t (error code t blank display)a) t PUSH t blank display

tENTERa)Appears when there are more than one error code.To rectify the error1Record down the error code.2Press .3Press ?/1 to turn off the receiver.4Rectify the error.For details, see “Error codes and remedies” below.5Turn on the receiver and perform Auto Calibration again (page 28).Error codes and remediesError code Cause and remedy

ERROR 10 The environment is too noisy. Make sure the environment is quiet during Auto Calibration.

ERROR 11 The speakers are placed too near the optimizer microphone. Place your speakers further away from the optimizer microphone.

ERROR 12 None of the speakers are detected. Make sure that the optimizer microphone is connected properly and perform Auto Calibration again.

ERROR 20 Front speakers are not detected or only one front speaker is detected. Check the front speaker connection.

ERROR 21 Only one surround speaker is detected. Check the surround speaker connection.

	Error code Cause and remedy

	ERROR 23 Surround back speaker is detected
			Getting
	but surround speakers are not
	connected. Be sure to connect the

	surround speakers.
			Started
	When warning codes appear

	During Auto Calibration, the warning code
	provides information on the measurement
	result. The warning code will appear on the
	display cyclically as follows:
	Warning code t blank display t (warning
	code t blank display)b) t PUSH t blank
	display t ENTER

b)Appears when there are more than one warning code.

You can choose to ignore the warning code as the Auto Calibration function will automatically adjust the settings. You can also change the settings manually.

To change the settings manually1Record down the warning code.

2Press .

3Press ?/1 to turn off the receiver.

4Follow the solution provided in the “Warning codes and solutions” below.

5Turn on the receiver and perform Auto Calibration again (page 28).

continued

29GB

Contents

Page WARNING For customers in Europe About This Manual The instructions in this manual are for model About area codes *Manufactured under license from Dolby Laboratories “DTS” Table of Contents Description and location of parts L 2CH SUR BACK DECODING N SLEEP O DIMMER About the indicators on the display LFE SP A ;D EX ;PL IIx ;PL G DTS O Playback DTS-ES channel DTS 96/24 Rear panel ADIGITAL INPUT/OUTPUT section CSPEAKERS section Connects to a IN jacks Remote commander continued A TV ?/1 on or off AV ?/1 Press to turn on or off the operate (page 67) m/Mb) Press to player ray disc player or blu-raydisc player S same time to select the channel entry mode, either >10/x VCR, satellite tuner or CD 1: Installing speakers 2: Connecting speakers 3a: Connecting the audio components 3b: Connecting the video components Connecting components with HDMI jacks HDMI feature AHDMI cable (not supplied) 17GB Notes on HDMI connections •The multi/stereo area audio signals of a Super Audio CD are not output In this case, check the specification of the connected component •Refer to the operating instructions of each component connected for details We do not recommend using a Connecting a TV Tips AAudio cord (not supplied) BVideo cord (not supplied) CComponent video cord (not supplied) 19GB Connecting a DVD player/DVD recorder The following illustration shows how to connect a DVD player/DVD recorder Connecting a DVD player ACoaxial digital cord (not supplied) BVideo cord (not supplied) 20GB Connecting a DVD recorder AOptical digital cord (not supplied) BAudio cord (not supplied) CVideo cord (not supplied) DComponent video cord (not supplied) 21GB Connecting a satellite tuner/ set-topbox •Do not bend or tie optical digital cords AOptical digital cord (not supplied) BAudio cord (not supplied) 22GB Connecting components with analog video and audio jack CAudio/video cord (not supplied) 23GB 4: Connecting the antennas (aerials) 5:Preparing the receiver and the remote 6:Selecting the speaker system 7:Calibrating the appropriate settings automatically Performing Auto Calibration 1 Press AUTO CAL Measurement starts in 5 seconds and the display changes as follows: A.CAL [5] t A.CAL [4] t A.CAL [3] tA.CAL [2] t A.CAL [1] Error and warning codes When error codes appear tENTER a)Appears when there are more than one error code To rectify the error 8:Adjusting the speaker levels and balance 5 Press V/v repeatedly to select “T. TONE Y” The test tone is output from each speaker in sequence as follows: For details, see “Adjusting the level (LEVEL menu)” (page 39) •The adjusted value is shown on the display during adjustment 7 Repeat steps 1 to 5 to select “T. TONE N” Selecting a component Listening/Watching a component Watching a DVD 1 Turn on the TV and DVD player 3 Press DVD You can also use INPUT SELECTOR on this receiver to select “DVD” 4 Switch the input of the TV so that an image of the DVD is displayed Navigating through menus Overview of the menus Menu Parameters Settings Initial 37GB 38GB Adjusting the level Adjusting the equalizer Settings for the surround sound Using the surround back decoding mode (SB DEC) Types of the surround back decoding functions xSB AUTO Output Surround back Settings for the tuner Settings for the audio Settings for the video Settings for the system xCNT SPK (Center speaker) xSUR SPK (Surround speakers) The surround back speaker will be set to the same setting If you have not connected surround speakers, select “NO” xSB SPK (Surround back speaker) xFRT DIST. (Front speaker distance) xCNT DIST. (Center speaker distance) 1.5meters closer to your listening position (B) xSL DIST. (Surround left speaker distance) xSR DIST. (Surround right speaker distance) xSUR POS (Surround speaker position) •SIDE/LO •SIDE/HI •BEHD/LO Enjoying Dolby Digital and DTS Surround sound Types of A.F.D. mode Decoding A.F.D. mode Multi channel Effect Selecting a preprogrammed sound field For details, see “Types of sound field available” (page 51) 50GB Types of sound field available Sound field for Movie CINEMA STUDIO EX A About DCS (Digital Cinema Sound) Sound fields with DCSmark use DCS technology About CINEMA STUDIO EX modes The CINEMA STUDIO EX modes consist of the following three elements •Virtual Multi Dimension Using only the front speakers Listening to the sound without any adjustment 2 While holding down 2CH, press ?/1 Listening to FM/AM radio 2 Press TUNING + or TUNING – Using the controls on the receiver In case of poor FM stereo reception Direct tuning 2 Press D.TUNING 3 Press the numeric buttons to enter the frequency 4 Press ENTER If you cannot tune in a station Presetting radio stations Tuning to preset stations 2 Press PRESET + or PRESET – repeatedly to select the preset station you want Each time you press the button, you can select a preset station as follows: 2Press TUNING MODE repeatedly to select “PRESET T.” 3Turn TUNING +/– to select the preset station you want Using the Radio Data System (RDS) (Models of area code CEL, CEK only) •RDS is operable only for FM stations Receiving RDS broadcasts 58GB Displaying RDS information While receiving an RDS station, press DISPLAY repeatedly on the receiver Description of program types Program type Description Switching between digital and analog audio Enjoying the DIGITAL MEDIA PORT Connecting the DIGITAL MEDIA PORT adapter AVideo cord (not supplied) To detach the DIGITAL MEDIA PORT adapter from DMPORT jack Press and hold both sides of the connector and then pull out the connector 62GB Listening to a connected component through DMPORT connection 1 Press DMPORT You can also use the INPUT SELECTOR on the receiver to select “DMPORT” 2 Start playback of the connected component Initial setting: –NONE Listening to digital sound from other inputs Naming inputs Changing the display Using the Sleep Timer Recording using the receiver Changing button assignments Glossary xDolby Pro Logic xDTS-ES xDTS Neo:6 xDolby Surround (Dolby Pro Logic) xDTS 96/24 Precautions Troubleshooting •Check the HDMI connection •You cannot listen to the Super Audio CD by connecting HDMI The left and right sounds are unbalanced or reversed •Check that the speakers and components are connected correctly and securely •Adjust the balance parameters using the LEVEL menu Video Tuner The RDS information that you want does not appear Remote commander The remote does not function •Point the remote at the remote sensor on the receiver •Remove any obstacles in the path between the remote and the receiver Specifications General Power consumption Supplied accessories For details on the area code of the component you are using, see page Design and specifications are subject to change without notice Index Page Page Sony Corporation