Sony STR-DH540 System Settings menu, Operating without using the OSD

61GB
Adjusting Settings
xInput Edit
Lets you set the following items for each
input.
•Watch: Displays an input to the Watch
menu.
•Listen: Displays an input to the Listen
menu.
•Watch+Listen: Displays an input to both
the Watch and Listen menus.
xAudio Input Assign
Lets you set the audio input jack(s)
assigned to each input.
For details, see “Using other audio input
jacks (Audio Input Assign)” (page 51).
xName In
Lets you enter a name of up to 8 characters
for inputs and display it.
It is more recognizable having the
equipment named on the display than the
jacks.
1Select “Name In”, then press .
2Select the input you want to name,
then press .
3Press V/v repeatedly to select a
character, then press b.
You can move the input position
backward and forward by pressing B/b.
4Repeat step 3 to input a character
one by one, then press .
The name you entered is registered.
System Settings menu
You can adjust the settings of the receiver.
xLanguage
Lets you select the language for the
messages on the screen.
•English
•French
•German
• Spanish
xAuto Standby
Lets you set the receiver switch to standby
mode automatically when you do not
operate the receiver or when there is no
signals input to the receiver.
•On: Switches to standby mode after
approximately 30 minutes.
•Off: Does not switch to standby mode.
• This function does not work when “FM” or
“AM” input is selected.
• If you use the Auto standby mode and the Sleep
Timer at the same time, the Sleep Timer has
priority.
Operating without using
the OSD
You can operate this receiver using the
display panel even if the TV is not
connected to the receiver.
1Press AMP MENU.
The menu is displayed on the display
panel of the receiver.
2Press V/v repeatedly to select the
menu you want, then press .
3Press V/v repeatedly to select the
parameter you want to adjust, then
press .
4Press V/v repeatedly to select the
setting you want, then press .
Notes
Using the menu on the
display panel
AMP MENU
RETURN
O
V/v/B/b,