9GB

Supplied accessories

Operating Instructions (this manual)
Quick Setup Guide (1)
Remote control (RM-AAU168) (1)
R6 (size AA) batteries (2)
FM wire antenna (aerial) (1)
AM loop antenna (aerial) (1)
Optimizer microphone (ECM-AC2) (1)
Insert two R6 (size-AA) batteries
(supplied) in the remote control. Observe
the correct polarity when installing
batteries.
Do not leave the remote control in an extremely
hot or humid place.
• Do not use a new battery with old ones.
Do not mix manganese batteries and other kinds
of batteries.
• Do not expose the remote control sensor to
direct sunlight or lighting apparatuses. Doing so
may cause a malfunction.
If you do not intend to use the remote control for
an extended period of time, remove the batteries
to avoid possible damage from battery leakage
and corrosion.
• When you replace the batteries, the remote
control buttons may be reset to their default
settings. If this happens, reassign the input
buttons (page 71).
• When the receiver no longer responds to the
remote control, replace all the batteries with
new ones.

Inserting batteries into

the remote control

Notes