123US
D:\NORM'S JOB\SONY HA\SO130039\STR-DN1030_PMRF
06\4420297142_US\US07ADD_STR-DN1030-CEL.fm
masterpage: Right
STR-DN1030
4-420-297-14(2)
Additional Information
• A maximum of 20 connectable devices has
been set. Delete unnecessary devices on
the device list, and then set “Auto Access”
to “Allow” (page 99).
• Server operation of the receiver is
suspended if the receiver is conducting
one of the following operations.
– Playing a track stored on the server (the
receiver is operating as a player)
– Updating the software
– Formatting the system
The receiver cannot be turned on
automatically when accessed by
devices on the network.
• The receiver itself does not support the
Wake-on-LAN standard. Therefore the
receiver cannot be turned on by Wake-on-
LAN when “Network Standby” is set to
“Off”. Set “Network Standby” to “On” so
that the receiver can respond to operations
by other devices via a network (page 101).
Devices on the network cannot turn on
the receiver.
• The receiver cannot be turned on with a
Wake-on-LAN start up operated by other
devices on a network.
The receiver cannot play the track that
is currently being played by the PARTY
host.
• The PARTY host is playing a track of an
audio format that cannot be played on the
receiver.
• It may take a while before the playback
sound is output.
The receiver joins an unintended
PARTY.
• If more than one PARTY has been started
when the receiver joins, the receiver may
not be able to join the PARTY you want.
Close the other PARTY, and then join the
PARTY you want.
The receiver cannot be found from an
iOS device.
• Check your set-up of the firewall of the
security software. Refer to the website
(page 126) for details.
• Make sure the iOS device or the computer
with iTunes is connected to your home
network.
• Update the AirPlay software version of the
receiver and the iOS device to the latest
version (page 77).
The sound skips.
• The sound may skip depending on factors
such as the network environment when
you use a wireless network.
• The servers are overloaded. Close all
unneeded applications you are currently
using.
This receiver cannot be operated.
• Update the software version of the iOS
device to the latest version (page 77).
• Update the software version of the
receiver to the latest version (page 77).
• Make sure another device is not streaming
to the AirPlay compatible device at the
same time.
Buttons such as MASTER VOL +/– or
2 +/–, N, X, x, . and > do not
work.
• Make sure that the settings that allow
iTunes to accept control from this receiver
are active.
• The receiver is not selected as the remote
speaker on the iOS device. Select the
receiver as the network speaker.