Sony STR-DN840 Specifications

119US

Additional Information

Specifications

AUDIO POWER

SPECIFICATIONS

POWER OUTPUT AND TOTAL

HARMONIC DISTORTION:

(USA model only)

With 6 ohm loads, both channels driven,

from 20 – 20,000 Hz; rated 100 watts per

channel minimum RMS power, with no

more than 0.09% total harmonic distortion

from 250 milliwatts to rated output.

Amplifier section

Minimum RMS Output Power1)

(6 ohms, 20 Hz – 20 kHz, THD 0.09%)

95 W + 95 W

Stereo Mode Output Power1)

(6 ohms, 1 kHz, THD 1%)

110 W + 110 W

Surround Mode Output Power1) 2)

(6 ohms, 1 kHz, THD 0.9%)

150 W per channel

1) Measured under the following conditions:

Power requirements: 120 V AC, 60 Hz.

2) Reference power output for front, center,

surround, surround back and front high

speakers. Depending on the sound field settings

and the source, there may be no sound output.

Frequency response

Analog

10 Hz – 100 kHz, +0.5/–2 dB (with

sound field and equalizer bypassed)

Input

Analog

Sensitivity: 500 mV/50 kilohms

S/N3): 105 dB (A, 500 mV4))

Digital (Coaxial)

Impedance: 75 ohms

S/N: 100 dB (A, 20 kHz LPF)

Digital (Optical)

S/N: 100 dB (A, 20 kHz LPF)

Output (Analog)

SUBWOOFER

Voltage: 2 V/1 kilohm

Equalizer

Gain levels

±10dB, 1dB step

3) INPUT SHORT (with sound field and equalizer

bypassed).

4) Weighted network, input level.

FM tuner section

Tuning range

87.5 MHz – 108.0 MHz (100 kHz step)

Antenna (aerial)

FM wire antenna (aerial)

Antenna (aerial) terminals

75 ohms, unbalanced

AM tuner section

Tuning range

530 kHz – 1,710 kHz (10 kHz step)

531 kHz – 1,710 kHz (9 kHz step)

Antenna (aerial)

Loop antenna (aerial)

Video section

Inputs/Outputs

Video:

1 Vp-p, 75 ohms

Contents

Main To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. For customers in the United States Owners Record WARNING Important Safety Instructions Page CAUTION For customers in Canada About This Manual On copyrights FLAC Decoder Page Table of Contents Connections Preparing the Receiver Basic Operations Tuner Operations BRAVIA Sync Features Other Operations Adjusting Settings Using the Remote Control Additional Information Supplied accessories Inserting batteries into the remote control Description and location of parts Front panel Indicators on the display panel Page Rear panel RM-AAU170 To use the buttons printed in pink To control the receiver Remote control Page Page To control other Sony equipment Getting started Digital audio formats supported by the receiver 1: Installing the speakers Connections Example of speaker system configuration 5.1 channel speaker system 7.1 channel speaker system using surround back speakers 7.1 channel speaker system using front high speakers 2: Connecting the speakers Bi-amplifier connection 3: Connecting the TV To enjoy the TV broadcast in multi channel surround sound from the receiver To listen to the sound from the TV 4a: Connecting the video equipment Using HDMI connection HDMI features Notes on HDMI connections If you want to connect several digital equipment, but cannot find an unused input When connecting cords Connections If your equipment does not have an HDMI jack, see page 28. Connecting equipment with HDMI jacks AAA AHDMI cable (not supplied) Sony recommends that you use an HDMI- authorized cable or Sony HDMI cable. Page 4b: Connecting the audio equipment 5: Connecting the antennas (aerials) 6: Connecting to the network A Broadband line connection Modem Router LAN cable (CAT5) (For a wired LAN connection only) Server Configuration example Connecting the AC power cord (mains lead) Turning on the receiver Setting up the receiver using the Easy Setup Preparing the Receiver Notes on Speaker Settings (Auto Calibration) 1 2 Confirm active subwoofer setup To set the surround back speakers 1 2 3 4 Configuring the network settings of the receiver 2 3 4 5 7 8 Searching for an access point and setting up a wireless network (Access Point Scan method) 1 2 4 5 6 7 Setting up a wireless network using an access point compliant with WPS 3 Setting up a wireless network using the WPS PIN code method 1 2 3 4 5 If you cannot find the network name (SSID) you want (manual setup method) 1 3 4 5 Guide to on-screen display (OSD) operation 1 2 3 Using the menu Playing an input source equipment 2 The home menu is displayed on the TV 2 The menu item list appears on the TV 5 6 To activate the muting function To avoid damaging your speakers Basic Operations Playing an iPod/iPhone Compatible iPod/iPhone models 2 3 4 To operate the iPod/iPhone Selecting the iPod/ iPhone control mode Notes on iPod/iPhone Playing a USB device Compatible USB devices The home menu is displayed on the TV 2 3 4 device To operate the USB device Notes on the USB device USB message list Listening to FM/AM radio Tuner Operations 1 2 In case of poor FM stereo reception 1 2 3 4 1 2 Presetting FM/AM radio stations (Preset Memory) 1 2 3 Selecting the sound field 1 2 3 xA.F.D. Auto (A.F.D. AUTO) Movie mode x2ch Stereo (2CH ST.) xAnalog Direct (A. DIRECT) xHD-D.C.S. xPLII Movie Music mode xHP 2CH xHP Direct (HP DIRECT) If you connect a subwoofer Notes on sound fields Using the Sound Optimizer function When headphones are connected 2 3 Selecting the calibration type Adjusting the Equalizer 1 2 3 Resetting sound fields to the default settings Using Network Features 2 About the network functions of the receiver About DLNA Setting up the server 1 When using Windows 8 2 The [Network Sharing Center] window appears. 3 4 5 6 7 8 9 1 4 5 6 7 8 Page 12 To refresh the server list 1 2 Enjoying audio content stored on the server 1 2 3 4 1 2 3 To set the auto access permission 1 Using the TV SideView 4 Enjoying Sony Entertainment Network (SEN) Checking the copyright protection Operating Home Network function using the remote control 1 2 3 To operate SEN function 1 2 3 4 To listen to the preset station 1 Using the PARTY STREAMING function 1 2 3 Starting a PARTY Joining a PARTY Streaming music from iTunes with AirPlay Compatible iPod/iPhone/ iPad models 1 2 3 Updating the software 2 3 4 5 6 7 To cancel the procedure or to go back to the previous Network features message list Using Network Features Software update SEN Searching for an item using a keyword 1 2 3 4 About the Bluetooth wireless technology About the Bluetooth functions of the receiver Using Bluetooth Features Communication System and Compatible Bluetooth Profiles of this receiver Listening to music of a Bluetooth device 1 2 3 4 1 2 3 4 To operate the Bluetooth device using the remote control 1 2 3 4 5 To turn off this function 1 2 To turn off this function Setting the Bluetooth Standby mode Setting the Bluetooth audio codecs What is BRAVIA Sync? Preparing for the BRAVIA Sync If your TV is compatible with the Control for HDMI- Easy Setting function 1 2 3 One-Touch Play System Audio Control System Power-Off Scene Select Correspondence table Home Theatre Control Remote Easy Control Switching between digital and analog audio (INPUT MODE) 1 2 3 5 6 Using a bi-amplifier connection 1 2 3 4 Using the Settings menu 2 3 4 Adjusting Settings Settings menu list Easy Setup Speaker Settings menu xAuto Calibration 1 2 When Error Code appears Check the error and perform Auto Calibration again. 1 Retry ? appears on the TV screen. 2 3 xCalibration Type xSpeaker Pattern xA.P.M. (Automatic Phase Matching) xCenter Lift Up xSB Assign (Surround back speaker assign) 1 2 3 1 2 3 xCrossover Freq. (Speaker crossover frequency) 1 Audio Settings menu xD.L.L. (Digital Legato Linear) xSound Optimizer xEqualizer xSound Field xA/V Sync. (Synchronizes audio with video output) xAuto Volume HDMI Settings menu xControl for HDMI xPass Through xHDMI Audio Out xSubwoofer Level Input Settings menu xInput Mode xInput Edit xAudio Input Assign xName In System Settings menu xLanguage xAuto Standby xNetwork Update 1 Operating without using the OSD 1 2 3 4 Overview of the menus Page Page Page To view the information on the display panel 1 2 When listening to FM and AM radio Reassigning the input button 1 2 3 Using the Remote Control Resetting the input buttons Additional Information 1 2 Precautions On placement On operation On cleaning On Bluetooth communication Troubleshooting Power Image Sound Page Page Tuner iPod/iPhone USB device Network connection Home Network Page AirPlay SEN Bluetooth device BRAVIA Sync (Control for HDMI) Remote control Error messages Clearing the memory About support information Additional Information Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (USA model only) FM tuner section HDMI Video iPod/iPhone section USB section Additional Information NETWORK section Bluetooth section General Index Numerics A B C F H I L M T U V W END-USER LICENSE AGREEMENT FOR SONY SOFTWARE