About the indications in the display

1

 

2

3

 

4

 

5

6

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SW

LFE

SP A ;DIGITAL EX ;PRO LOGIC IIx DTS-ES

NEO:6

 

MEMORY

 

 

 

 

 

SP B SLEEP OPT COAX96/24D.RANGE EQ STEREO MONO

 

L

C

R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SL

S

SR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SBL

SB SBR

qd

qs

qa

 

 

q; 9

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

qf

Operation Amplifier

ASW: Lights up when sub woofer selection is set to “YES” (page 18) and the audio signal is output from the SUB WOOFER jack.

BLFE: Lights up when the disc being played back contains the LFE (Low Frequency Effect) channel and the LFE channel signal is actually being reproduced.

CSP A/SP B: Lights up in accordance with the speaker system being used (A or B). Turns off when speaker output is turned off or when headphones are connected.

D; DIGITAL EX: “; DIGITAL” lights up when the receiver is decoding signals recorded in the Dolby Digital format.

“; DIGITAL EX” lights up when the receiver is decoding signals recorded in the Dolby Digital EX format.

E; PRO LOGIC IIx: “; PRO LOGIC” lights up when the receiver applies Pro Logic processing to 2 channel signals in order to output the center and surround channel signals. “; PRO LOGIC II” lights up when the Pro Logic II Movie/Music/Game decoder is activated. “; PRO LOGIC IIx” lights up when the Pro Logic IIx Movie/Music/Game decoder is activated. However, these indicators do not light up if both the center and surround speakers are set to “NO” and you select a sound field using the A.F.D. button.

Note

Dolby Pro Logic IIx decoding does not function for DTS format signals or for signals with a sampling frequency of more than 48 kHz.

FDTS-ES 96/24: “DTS” lights up when DTS signals are input. “DTS-ES” lights up when DTS-ES signals are input. “DTS 96/24” lights up when the receiver is decoding DTS 96 kHz/ 24 bit signals.

Note

When playing a DTS format disc, be sure that you have made digital connections and that INPUT MODE is not set to “ANALOG” (page 35).

GNEO:6: Lights up when DTS Neo:6 Cinema/ Music mode decoding is activated.

HTuner indicators: Lights up when using the receiver to tune in radio stations, etc. See pages 24–26 for tuner operations.

IEQ: Lights up when the equalizer is activated.

JD.RANGE: Lights up when dynamic range compression is activated (page 36).

KCOAX: Lights up when the source signal is a digital signal being input through the COAXIAL terminal.

LOPT: Lights up when the source signal is a digital signal being input through the OPTICAL terminal.

MSLEEP: Lights up when sleep timer is activated.

continued

27US