Mounting a TV

WARNING

If you allow the power cord to be pinched under or between pieces of equipment, this may result in a short circuit or an electric shock.

If you stumble over the power cord or the connecting cable, the stand may topple over and cause injury.

Decide on the installation location and lay the stand down before installing the TV.

Since the TV is heavy, it is recommended that you decide on the installation location and lay the Floating Stand down before installing the TV.

Note

Do not push or pull the Floating Stand while it is on the floor. The rubber footings on the base of the Floating Stand may come off.

1 Detach the Table Top Stand from the TV.

1Place the TV, with its screen facing down, on a stable, cloth-covered work surface, at least 20 cm (8 in) off the floor.

2Remove the screws that hold the TV to the Table Top Stand.

2

Rear side of the TV

1

At least 20 cm (8 in)

Soft rag

8 (US)