![](/images/backgrounds/176949/176949-5212x1.png)
4 Install the Mounting Rack (with the TV) onto the Plate Unit.
1Hold the Mounting Rack so that the two
center notches on either side touch the support braces of the Plate Unit.
2Gradually lift the Mounting Rack and TV upward keeping the center notches engaged with the support braces of the Plate Unit. Hitch the upper left and right hooks of the
Mounting Rack onto the anchor bars at the top of the left and right stabilizer arms of the Plate Unit.
3Confirm the four upper hooks are firmly hooked onto the two anchor bars of the Plate Unit and that the support braces are secured
in the center notches of the Mounting Rack.
4Firmly tighten all four upper and lower screws (+B6 ⋅ L20, supplied) on each side of the Mounting Rack.
2
Mounting Rack
1
Side view
Plate Unit | Mounting Rack |
| |
| with the TV |
2
1
Support brace
Right side
4
Screws
(+B6 ⋅ L20, supplied)
Confirm the completion of the installation
Check the following points.
•Four upper hooks of the Mounting Rack are firmly hooked onto the two anchor bars of the Plate Unit.
•The cord and the cable are not twisted or pinched.
•All the securing screws (+B6 ⋅ L20, supplied) are tightened.
WARNING
Incomplete installation may cause the product falling and result in injury or product damage. Also, improper placement of the AC power cord, etc., may cause fire or electric shock through a short circuit.
Be sure to confirm the completion of the installation for safety.
12 (US)