VAIO User Guide Back | Back to Top
Troubleshooting
How to Use
Windows 8: The Basics
Parts Description
Setup
Network / Internet
Connections
Settings
Playback
Backup / Recovery
Security
Other Operations
Notifications
Using Sleep Mode
In Sleep mode, all unnecessary devices of your VAIO computer are turned off, though some
devices stay on to retain the computer’s state including data you are working on. Sleep
mode is useful when you take a short rest, for example.
With the default Sleep mode settings, Rapid Wake is enabled and the computer’s state is
saved to the built-in storage device.
To activate Sleep mode
1. Open the charms [Details] and select the Settings charm.
2. Select Power and Sleep.
The power indicator light turns off when your VAIO computer enters Sleep mode.
Hint
By default, your VAIO computer enters Sleep mode automatically after about 30
minutes of inactivity while running on AC power.
The operations below also place your VAIO computer into Sleep mode.
Press the (Power) button (with the default setting).
Note that if you press and hold down the (Power) button for more than four
seconds, your VAIO computer will turn off automatically. Doing this will erase all
unsaved data.
Close the LCD screen lid and leave the computer unused for a few seconds.
To return to Normal mode
1. Press the (Power) button.
Note
By default, your VAIO computer automatically enters Hibernate mode when the battery
pack is running out of power. However, depending on the operating conditions, the
computer may fail to enter Hibernate mode.
If this occurs and the battery pack is running out of power, the computer will be turned
off, resulting in loss of unsaved data.
While the computer is running on battery power, save data frequently.
Before moving your VAIO computer, make sure that the power indicator light is off to
avoid impact or vibration to the running hard disk drive.
Hint
If you press and hold down the (Power) button for more than four seconds, your VAIO
computer will turn off automatically. Doing this will erase all unsaved data.
You can set to restore your VAIO computer from Sleep mode to Normal mode by
opening the LCD screen lid.
To change the action when you open the lid, start VAIO Control Center [Details] and
change the settings in Power and Battery.
Related Topic
194
Click to Search