Sony SWR30 Reconnecting your SmartBand Talk, Resetting your SmartBand Talk

To set up your SmartBand Talk using Bluetooth®

1Make sure that your SmartBand Talk has been charged for at least 30 minutes.

2Android™ device: Make sure that you have installed or updated the SmartBand

Talk application to the latest version.

3Turn on your SmartBand Talk.

4Android™ device: Turn on the Bluetooth® function, then scan for Bluetooth®

devices and select SWR30 in the list of available devices.

5Android™ device: Follow the instructions that appear on the screen. appears

briefly in the status bar and permanently in the Notification panel when a

connection with the SmartBand Talk is active.

You can drag down the status bar to open the Notification panel and get quick access to the

SmartBand application and the Lifelog application.

To install the SmartBand Talk application

1From the main application screen of your Android™ device, find and tap Play

Store to open the Google Play™ application.

2Tap the search icon, then search for “SmartBand Talk”.

3After the search results appear, tap SmartBand Talk, then follow the relevant

instructions to download and install the application.

You can only install the SmartBand Talk application on an Android™ device, for example, an

Android™ smartphone or tablet.

Reconnecting your SmartBand Talk

In cases where a connection gets lost, for example, when the connected Android™

device goes out of range, your SmartBand Talk automatically performs a series of

reconnection attempts. If no connection is found after a certain period, your

SmartBand Talk stops trying to reconnect. When this happens, you can use the

function key to force the accessory to try reconnecting, or you can use NFC to

reconnect the two devices.

To force the SmartBand Talk to try reconnecting

•Press the power key.

To reconnect your SmartBand Talk using NFC

1Android™ device: Make sure that the NFC function is turned on and that the

screen is active and unlocked.

2Place the Android™ device over your SmartBand Talk so that the NFC

detection area of each device touches the other.

Resetting your SmartBand Talk

Reset your SmartBand Talk if it behaves unexpectedly or if you want to connect it to

a new device.

To perform a factory data reset

1Turn off your SmartBand Talk.

2Press and hold down both the power key and the volume up and down keys

simultaneously until you feel three short vibrations followed by one longer

vibration, then release the keys.

You need to pair the SmartBand Talk with your Android™ device again.

To force your SmartBand Talk to shut down

•Long press the power key.