Amplifier Operations
Using the remote Z
The remote lets you operate the amplifier and the Sony components that are connected to it.
SYSTEM
POWER
FUNCTION |
|
|
|
|
|
(VIDEO 1/2, |
|
| – | + |
|
TAPE, CD, |
|
|
| ) | ) |
TUNER) | · | p | P | ||
|
|
|
|
| |
|
|
|
| + | + |
1Press SYSTEM POWER to turn on the amplifier.
2Press one of the FUNCTION buttons to select the component you want to use:
To listen to | Press |
|
|
Radio programs | TUNER |
|
|
Audio tapes | TAPE |
|
|
Compact discs (CD) | CD |
|
|
Video tapes | VIDEO1 |
|
|
Laser discs (or TV game) | VIDEO2 |
|
|
If the component does not turn on
Press the power switch on the component.
3Start playing.
See “Remote Button Descriptions” on page 19 for details.
To turn off the components
Press SYSTEM POWER. You can turn off audio components connected to the SWITCHED AC OUTLETs on the back of the amplifier at the same time.
Recording
This amplifier makes it easy to record to and from the components connected to the amplifier. You don’t have to connect playback and recording components directly: once you select a program source on the amplifier, you can record and edit as you normally would using the controls on each component.
Before you begin, make sure you’ve connected all components properly.
Function buttons
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ç |
|
|
| ç |
|
| |
|
|
|
|
|
|
|
|
|
| Playback component |
| Recording component | |||||
| (program source) |
| (tape deck, VCR) | |||||
|
|
|
|
|
|
|
|
|
ç: Audio signal flow
Recording on an audio tape or video tape
You can record on an audio tape or video tape using the amplifier. Refer to the instruction manual for the tape deck or VCR if you need help.
1 Press one of the function buttons to select the component to be recorded.
2 Set the component to be ready for playing. For example, insert a CD into the CD player.
3 Insert a blank tape into the recording deck and adjust the recording level, if necessary.
4 Start recording on the recording deck and then start playing the component.
9