Sony 374, TA-MR2ES, Stereo Amplifier warranty Features, Specifications

TA-MR2ES

Distributed Audio Amplifier

Features

General

•Silver Finish Distributed Audio Amplifier

•35W x 2 (8 ohms 20Hz-20kHz, THD 0.09%)

•40W x 2 (4 ohms 20Hz-20kHz, THD 0.09%)

•Audio Signal Sensor Activation

•19-inch Rack Mountable

IR Programming

•12 Distinct IR Code Sets

•IR Programming from Back Panel

•Vol +/- and Mute On/Off (Toggle)

Inputs and Outputs

•12V Trigger In x 1

•12V Trigger Out With 1.5 sec Delay x 1

•IR Input Port with Pass-Through x 1

•IR Output Port x 1

Specifications

General	Audio Input	Supplied	Weights and
• Power Consumption:	• Sensitivity: 150mV	Accessories	Measures
		• Instruction Manual	• 14 lbs. 5 oz (6.5 kg)
100W	• Impedance:
• Power Requirements:	50kilo Ohms	• AC Power Cord x 1	• 17” x 2 5/8” x 13 7/8”
120V, 60Hz	• S/N: 94dB (A-weighted	• Rack Mount Ear x 2	(430 x 67 x 350 mm)
• Frequency Response:	filter, 150mV input level)	• Rack Mount Screw x 8
5-100Khz, +0.5/-2dB			UPC Code
• Residual Noise: <150_V	Audio Output		• TBD
or less	• Voltage: Minimum 2V
• Channel Separation:
60dB/45dB	without clipped
	• Impedance: 1 kilo Ohms
	• S/N: 102dB (A-weighted
	filter, 2V output)

Sony Electronics Inc.	For more information:
1 Sony Drive	http://www.sony.com/dn
Park Ridge, NJ 07656

©2005 Sony Electronics Inc. All rights reserved. Features and specifications are subject to change without notice. Sony is a trademark of Sony. All other trademarks are trademarks of their respective owners.